top of page

Tools

Here at Top Notch we carry a variety of tools to help you complete a varied amount of projects

EIFS

Key tools include:

​

  • Notched Trowels: For applying adhesive and base coats evenly over insulation boards.
     

  • Hawk and Trowel: Used for spreading and smoothing the base coat and finish coat materials.
     

  • Hot Knife or Foam Cutter: For cutting insulation boards to the required sizes and shapes.
     

  • Rasp: To smooth and level the surface of insulation boards before applying the base coat.
     

  • Mixing Drill and Paddle: For thoroughly mixing base coats, adhesives, and finish coats to the correct consistency.
     

  • Utility Knife: For precise cutting of mesh, trims, and other materials.
     

  • Float: For achieving a uniform finish texture on the final coat.
     

These tools are essential for ensuring a high-quality EIFS installation that is both durable and visually appealing.

I.C.F.

Key tools include:
 

  • ICF Block Cutter: For cutting the ICF blocks to the desired size and shape.
     

  • Rebar Cutter and Bender: To cut and bend reinforcement bars to the required specifications.
     

  • Zip Ties and Tie Gun: For securing rebar in place within the ICF blocks.
     

  • Handsaw or Hot Knife: For making precise cuts in the ICF blocks.
     

  • Level and Square: To ensure the ICF blocks are properly aligned and level during assembly.
     

  • Concrete Vibrator: To consolidate concrete within the ICF forms and eliminate air pockets.
     

  • Drill and Screws: For attaching bracing and alignment systems to the ICF walls.
     

These tools are essential for the efficient and accurate installation of ICF systems, ensuring structural integrity and energy efficiency.

Masonry

Tools Needed for Mortared Manufactured Stone:
 

  • Trowels: For applying and spreading mortar onto surfaces and stones.
     

  • Masonry Saws or Angle Grinders: For cutting stones to the desired size and shape.
     

  • Mortar Mixing Tools: Such as a mixing drill or mortar mixer to prepare the mortar.
     

  • Buckets: For transporting and mixing mortar.
     

  • Levels: To ensure stones are level and plumb during installation.
     

  • Hammers and Chisels: For trimming and shaping stones.
     

  • Jointer Tools: For finishing and smoothing mortar joints.
     

  • Brushes and Sponges: To clean stones and remove excess mortar from joints.
     

  • Notched Trowels: For applying mortar with a consistent thickness.


Tools Needed for Screw-On Panel Stone:

 

  • Drill/Driver: For driving screws to secure the stone panels to the wall.
     

  • Screws: Specifically designed for masonry or exterior use to attach panels.
     

  • Level: To ensure the panels are installed straight and level.
     

  • Tape Measure: For accurate measurement and placement of panels.
     

  • Masonry Saws or Angle Grinders: For cutting panels to fit around openings and edges.
     

  • Utility Knife: For trimming and scoring backing materials if necessary.
     

  • Caulking Gun: For applying adhesive or sealant where required.
     

  • Safety Gear: Including gloves, goggles, and dust masks to protect from dust and debris during cutting and installation.
     

These tools are essential for the efficient and precise installation of mortared manufactured stone and screw-on panel stone, ensuring a durable and attractive finish.

Decorative

Concrete

Key tools include:

​

  • Trowels and Floats: For spreading, leveling, and finishing concrete surfaces.
     

  • Concrete Stamps and Stencils: For creating patterns and textures on the concrete surface.
     

  • Buckets and Mixing Tools: For mixing cleaning solutions and sealers.
     

  • Sprayers: For applying stains, dyes, or sealers evenly over the surface.
     

  • Rollers and Brushes: For applying coatings and sealers to decorative concrete.
     

  • Grinders and Polishers: For smoothing and polishing the concrete to achieve a high-gloss finish.
     

  • Joint Saws: For cutting control joints to prevent cracking.
     

  • Scrub Brushes: For scrubbing the concrete surface to ensure thorough cleaning.
     

  • Protective Gear: Including gloves, masks, and eye protection to ensure safety during application.

​

These tools are essential for achieving professional results in decorative concrete work and maintaining the appearance and longevity of concrete surfaces through proper cleaning and resealing.

MISC.

We also carry various other miscellaneous tools including.

​

  • Tape Measures: For accurate measurement of materials and spaces.
     

  • Utility Knives: For cutting various materials, including drywall, insulation, and packaging.
     

  • Hammers: For driving nails and other fasteners, as well as general construction tasks.
     

  • Screwdrivers: Both Phillips and flathead, for driving screws and general fastening.
     

  • Pliers: For gripping, bending, and cutting wires or small materials.

  • Levels: For ensuring surfaces are level and plumb.
     

  • Chalk Lines: For marking straight lines on surfaces.
     

  • Fasteners: for attaching foam and other materials to various substrates

bottom of page